ItsMods

Seriously though, I can't get it to work
I portforwarded every port:



Yet it keeps saying:




Help a broda out over here!

---

1. no steam is not running
2. no plugins are loaded
3. i copied the files from my mw3 dir. didn't work

(03-12-2012, 22:59)JariZ Wrote: [ -> ]Yet it keeps saying:

Do you actually check the list?
That highlighted sentence is a lie (shows that for me, still listed though)

http://www.canyouseeme.org/ also make sure you 've desabled ISP firewall in your ISP user panel

Computer haz Firewall? antivirus firewall can block it i have to turn mine off.

also why u no ask me for thay helpz???

@Tylerd86 you weren't Online
@Nukem I did and it didn't show up

Try changing your router's DMZ setting. And put steam.dll in your server root (get it from your steam client install).

will try @Pozzuh

This worked for me with opening nat -
you must enable telnet first ... idk if ports match for server

Quote:Step 1- On your PC go to start click on run copy and paste this command. telnet 192.168.1.254 (press enter)

This will open a telnet session with your modem, you will then be asked for a Username and Password.

Username: admin (press enter)
Password: your modems password (usually blank by default) (press enter)

Step 2- copy and paste these 4 command lines one at a time pressing enter after each one is done.

:connection bind application=CONE(UDP) port=3074-3075

:connection bind application=CONE(UDP) port=3478-3479

:connection bind application=CONE(UDP) port=3658

aveall

then close the telnet session

Step 3- Reboot your modem (just power off and back on) not always needed but is helpful to do after changes made.

nah, the router doesn't accept telnet connections
Stupid provider.... :\

(03-13-2012, 12:26)JariZ Wrote: [ -> ]Stupid provider.... :\

This sentence just told me that you probably have UPC as provider.