08-01-2011, 14:55
08-01-2011, 15:32
Do not add server.cfg to zone source add mywhitelist to zone source.
Place server.cfg and exec mywhitelist from server.cfg file.
How do you do it in private match?
1. Load mod.
2. shift + ~
3. exec server
//output:
// execing server.cfg from disk
// execing mywhitelist.cfg from fast file
Then start your private match.
Only difference with dedicated unranked is you don't have to exec the server.cfg as
that is configured in the game servers control panel.
Place server.cfg and exec mywhitelist from server.cfg file.
How do you do it in private match?
1. Load mod.
2. shift + ~
3. exec server
//output:
// execing server.cfg from disk
// execing mywhitelist.cfg from fast file
Then start your private match.
Only difference with dedicated unranked is you don't have to exec the server.cfg as
that is configured in the game servers control panel.
08-01-2011, 16:32
(08-01-2011, 15:32)deadcrayon Wrote: [ -> ]Do not add server.cfg to zone source add mywhitelist to zone source.Did all that and still having enviroment sounds
Place server.cfg and exec mywhitelist from server.cfg file.
How do you do it in private match?
1. Load mod.
2. shift + ~
3. exec server
//output:
// execing server.cfg from disk
// execing mywhitelist.cfg from fast file
Then start your private match.
Only difference with dedicated unranked is you don't have to exec the server.cfg as
that is configured in the game servers control panel.
08-02-2011, 12:29
(08-01-2011, 16:32)FRAN710 Wrote: [ -> ]I have this:(08-01-2011, 15:32)deadcrayon Wrote: [ -> ]Do not add server.cfg to zone source add mywhitelist to zone source.Did all that and still having enviroment sounds
Place server.cfg and exec mywhitelist from server.cfg file.
How do you do it in private match?
1. Load mod.
2. shift + ~
3. exec server
//output:
// execing server.cfg from disk
// execing mywhitelist.cfg from fast file
Then start your private match.
Only difference with dedicated unranked is you don't have to exec the server.cfg as
that is configured in the game servers control panel.
mod.csv: rawfile,mywhitelist.cfg
mywhitelist.cfg
Code:
setmoddvar r_treeScale
setmoddvar wind_grass_gust_strength
setmoddvar wind_grass_scale
setmoddvar wind_grass_tension
setmoddvar wind_local_frequency
setmoddvar wind_leaf_scale
setmoddvar r_streamFreezeState
setmoddvar r_picmip
setmoddvar r_picmip_bump
setmoddvar r_picmip_manual
setmoddvar r_picmip_spec
setmoddvar r_picmip_water
Code:
exec mywhitelist.cfg
Code:
setDvar( "r_treeScale", "0" );
setDvar( "wind_grass_gust_strength", "0" );
setDvar( "wind_grass_scale", "0" );
setDvar( "wind_grass_tension", "0" );
setDvar( "wind_local_frequency", "0" );
setDvar( "wind_leaf_scale", "0" );
08-02-2011, 12:59
You don't need to put 'exec myWhitelist.cfg' in your server config. You need your players to type it in their console /exec myWhitelist.cfg or to automated it go to class.menu -> onOpen{ } and put execNow "exec myWhitelist"; in it
08-02-2011, 13:16
(08-02-2011, 12:59)Pozzuh Wrote: [ -> ]You don't need to put 'exec myWhitelist.cfg' in your server config. You need your players to type it in their console /exec myWhitelist.cfg or to automated it go to class.menu -> onOpen{ } and put execNow "exec myWhitelist"; in itOn the menu thing had
Code:
onOpen
{
setDvar cl_bypassMouseInput "1"
execNow exec "server.cfg";
}
08-02-2011, 13:21
(08-02-2011, 13:16)FRAN710 Wrote: [ -> ]it should be(08-02-2011, 12:59)Pozzuh Wrote: [ -> ]You don't need to put 'exec myWhitelist.cfg' in your server config. You need your players to type it in their console /exec myWhitelist.cfg or to automated it go to class.menu -> onOpen{ } and put execNow "exec myWhitelist"; in itOn the menu thing had
Will try thx.Code:onOpen
{
setDvar cl_bypassMouseInput "1"
execNow exec "server.cfg";
}
Code:
onOpen
{
setDvar cl_bypassMouseInput "1"
execNow "exec myWhitelist.cfg";
}
myWhitelist.cfg is on the client's pc and cannot be executed by the server.
08-03-2011, 01:11
(08-02-2011, 13:21)Pozzuh Wrote: [ -> ]Did all that but still not whitelistening. I think the problem is that i have a quickmenu and that's for normal menus.(08-02-2011, 13:16)FRAN710 Wrote: [ -> ]it should be(08-02-2011, 12:59)Pozzuh Wrote: [ -> ]You don't need to put 'exec myWhitelist.cfg' in your server config. You need your players to type it in their console /exec myWhitelist.cfg or to automated it go to class.menu -> onOpen{ } and put execNow "exec myWhitelist"; in itOn the menu thing had
Will try thx.Code:onOpen
{
setDvar cl_bypassMouseInput "1"
execNow exec "server.cfg";
}
server.cfg is on the server and cannot be executed by the client.Code:onOpen
{
setDvar cl_bypassMouseInput "1"
execNow "exec myWhitelist.cfg";
}
myWhitelist.cfg is on the client's pc and cannot be executed by the server.
08-03-2011, 06:40
(08-03-2011, 01:11)FRAN710 Wrote: [ -> ](08-02-2011, 13:21)Pozzuh Wrote: [ -> ]Did all that but still not whitelistening. I think the problem is that i have a quickmenu and that's for normal menus.(08-02-2011, 13:16)FRAN710 Wrote: [ -> ]it should be(08-02-2011, 12:59)Pozzuh Wrote: [ -> ]You don't need to put 'exec myWhitelist.cfg' in your server config. You need your players to type it in their console /exec myWhitelist.cfg or to automated it go to class.menu -> onOpen{ } and put execNow "exec myWhitelist"; in itOn the menu thing had
Will try thx.Code:onOpen
{
setDvar cl_bypassMouseInput "1"
execNow exec "server.cfg";
}
server.cfg is on the server and cannot be executed by the client.Code:onOpen
{
setDvar cl_bypassMouseInput "1"
execNow "exec myWhitelist.cfg";
}
myWhitelist.cfg is on the client's pc and cannot be executed by the server.
That shouldn't matter.
maybe remove the '.cfg'
Code:
onOpen
{
setDvar cl_bypassMouseInput "1"
execNow "exec myWhitelist";
}
Code:
rawfile,myWhitelist.cfg
08-03-2011, 11:58
(08-03-2011, 06:40)Pozzuh Wrote: [ -> ]execNow exec "myWhitelist";(08-03-2011, 01:11)FRAN710 Wrote: [ -> ](08-02-2011, 13:21)Pozzuh Wrote: [ -> ]Did all that but still not whitelistening. I think the problem is that i have a quickmenu and that's for normal menus.(08-02-2011, 13:16)FRAN710 Wrote: [ -> ]it should be(08-02-2011, 12:59)Pozzuh Wrote: [ -> ]You don't need to put 'exec myWhitelist.cfg' in your server config. You need your players to type it in their console /exec myWhitelist.cfg or to automated it go to class.menu -> onOpen{ } and put execNow "exec myWhitelist"; in itOn the menu thing had
Will try thx.Code:onOpen
{
setDvar cl_bypassMouseInput "1"
execNow exec "server.cfg";
}
server.cfg is on the server and cannot be executed by the client.Code:onOpen
{
setDvar cl_bypassMouseInput "1"
execNow "exec myWhitelist.cfg";
}
myWhitelist.cfg is on the client's pc and cannot be executed by the server.
That shouldn't matter.
maybe remove the '.cfg'
Also, did you properly put the config in your mod csv?Code:onOpen
{
setDvar cl_bypassMouseInput "1"
execNow "exec myWhitelist";
}
Code:rawfile,myWhitelist.cfg
execNow "exec myWhitelist"; -> is this correct? its not working on private match or dedicated server.