Infrared Vision

cervantes · (This post was last modified: 07-20-2011, 23:42 by cervantes.)

Is there a way to set vision to infrared without using the gun attachment?

**AZUMIKKEL** · (This post was last modified: 07-21-2011, 00:52 by AZUMIKKEL.)

There might be, but I haven't found it. I've searched really hard for it along with chopper ESP without luck. That was before the complete file rip that modtools provided though.

Oh, found this in /raw/vision/infrared.vision

Code:
r_postEmissiveBrightening "0.1"

r_bloomTweaks         "1"

r_filmEnable                  "1"

r_sCurveEnable                "1"


r_filmMidStart             "0.300000" 
r_filmMidEnd               "0.800000" 
r_filmDarkFeather          "0.000000" 
r_filmLightFeather         "0.000000" 
r_filmColorTemp            "6499.5029 6499.5029 6499.5029" 
r_filmSaturation           "0.0000 0.0000 0.0000" 
r_filmDarkTint             "0.1500 0.1500 0.1500" 
r_filmMidTint              "0.3499 0.3499 0.3499" 
r_filmLightTint            "0.4999 0.4999 0.4999" 
r_filmBleach               "0.0000 0.0000 0.0000" 
r_filmContrast             "1.0000 1.0000 1.0000" 

r_sCurveShoulderStrength        "0.032000" 
r_sCurveLinearStrength          "0.074000" 
r_sCurveLinearAngle             "0.179000" 
r_sCurveToeStrength             "0.095999" 
r_sCurveToeNumerator            "0.010000" 
r_sCurveToeDenominator          "1.000000" 

r_bloomTintWeights              "0.1500 0.1500 0.1500 0.1500" 
r_bloomColorScale               "0.0000 0.0000 0.0000 1.0000" 
r_bloomTintScale                "0.0000 0.0000 0.0000 0.0000" 
r_bloomCurveBreakpoint          "1.0000 1.0000 1.0000 1.0000" 
r_bloomCurveLoGamma             "0.5500 0.5500 0.5500 0.5500" 
r_bloomCurveHiGamma             "0.1000 0.1000 0.1000 0.1000" 
r_bloomExpansionControl         "0.1000 0.1000 0.1000 0.1000" 
r_bloomExpansionWeights         "0.1000 0.1000 0.1000 0.1000" 
r_bloomExpansionSource          "0.100000" 
r_bloomBlurRadius               "1.000000" 


r_bloomCurveLoBlack             "0.1000 0.1000 0.1000 0.1000" 
r_bloomCurveLoWhite             "1.0000 1.0000 1.0000 1.0000" 
r_bloomCurveLoRemapBlack        "0.1000 0.1000 0.1000 0.1000" 
r_bloomCurveLoRemapWhite        "1.0000 1.0000 1.0000 1.0000" 
r_bloomCurveHiBlack             "0.1000 0.1000 0.1000 0.1000" 
r_bloomCurveHiWhite             "1.0000 1.0000 1.0000 1.0000" 
r_bloomCurveHiRemapBlack        "0.1000 0.1000 0.1000 0.1000" 
r_bloomCurveHiRemapWhite        "1.0000 1.0000 1.0000 1.0000" 
r_filmHue                  "0.0000 0.0000 0.0000" 




r_reviveFX_Enable		"0"

Client-dvars I believe.
Does anyone know how to launch a .cfg / .vision from a .gsc file? (.vision acts the same way as .cfg)
This would allow us to use visions just like in mw2!
I can do this already, but it would require me to write like 3000 lines of setClientDvar

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	[Release] Vision Changer	Ich1994	14	14,218	05-21-2013, 19:06 Last Post: [HARD] Tony.
	[Tutorial] MW3 Vision List	Yamato	4	10,943	09-18-2012, 20:56 Last Post: Yamato
	[Release] Black Ops 2 Vision list so far	d0h!	5	7,445	09-17-2012, 21:47 Last Post: Yamato
	[Release] Underwater Vision	Yamato	7	7,446	01-15-2012, 20:14 Last Post: mymodzzTM
	I Had A Vision	4FunPlayin	17	11,965	08-10-2011, 19:23 Last Post: 4FunPlayin
	Help vision	Puffiamo	9	7,168	07-02-2011, 10:06 Last Post: No One
	[Request] night vision	No One	31	20,164	02-27-2011, 15:43 Last Post: Arteq
	Normal vision	GeKKoFL0X	1	4,465	12-31-2010, 14:02 Last Post: d0h!
	How to enable a vision?	alistair3149	2	3,699	12-28-2010, 09:23 Last Post: d0h!